HP Pavilion x360 Convertible PC (model numbers: 13-s000 through 13-s099) Maintenance and Service Guide

3. Remove the power button board (3) and cable.
Reverse this procedure to install the power button board.
Power connector cable
Description Spare part number
Power connector cable 809824-001
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see Keyboard/top cover on page 22).
5. Disconnect the battery cable from the system board (see Battery on page 25).
6. Remove the WLAN module (see WLAN module on page 29).
7. Remove the system board (see System board on page 31).
8. Remove the display assembly (see Display assembly on page 38).
Remove the power connector cable:
1. Slide the power connector cable (1) out of the cavity in the base enclosure.
46 Chapter 5 Removal and replacement procedures