AHCI and RAID on HP Compaq dc7800

3. After replacing the hard drive, automatic rebuild of the redundancy begins immediately after the sys-

tem is powered up and operating system starts. The following message appears:

Migration to RAID 0 from two non-RAID hard drives using Intel Matrix Stor-

age Console

NOTE: HP Compaq dc7800 Business PC products only support RAID based on two identical SATA hard

drives in either RAID 0 or RAID 1 or Matrix Mode of RAID 0 and RAID 1.

1. Open the Intel Matrix Storage Console and select Improve storage performance with

RAID 0.

2. Click Actions > Create a RAID 0 volume to open a verification window.