HP Enterprise, HP Managed - HP Universal Scan Solution User Guide
Table Of Contents
- Introduction
- Install the HP Scan app
- App overview
- Use the HP Scan app
- Use the scan preview window to edit scanned pages
- View scanned pages in a thumbnail grid in the scan preview window
- View scanned pages in a document list in the scan preview window
- View a scanned page using zoom mode in the scan preview window
- Use the scan preview window to crop pages
- Use the scan preview window to delete or remove pages
- Use the scan preview window to add or remove pages
- Use the scan preview window to change page order
- Use the scan preview window to change page orientation
- Use the scan preview window to insert a divider, page break, or job separator
- Scan more pages in the scan preview window
- Configure the HP Scan app
- Manage Shortcuts
- Manage and maintain the scanner
- Uninstall the HP Scan app or remove a device from the app
- Index
Enable the Scan to USB feature
Enable the Scan to USB feature on the scanner control panel option using the HP Scan app.
Scan To USB is an option that can be enabled on the scanner control panel. To enable this feature, use the HP
Scan app.
NOTE: The Scan To USB feature is used from the scanner control panel during a scan-to-usb operation from
the scanner control panel to update scan settings by sending them to the hardware via an LEDM protocol.
1. Open the HP Scan app.
2. Select Maintain Your Scanner.
The Scanner Tools Utility opens.
Enable the Scan to USB feature 59