HP Scanjet Enterprise 8500 fn1 - User Guide

2. Remove the originals or any obstructions from the paper path.
TIP: Use the green thumb wheel on the left side of the open hatch to manually advance originals through
the paper path.
3. Remove the ADF duplex background, remove any debris, and then slide the component back into its housing
until it clicks into place.
4. Close the ADF hatch until it snaps into place.
5. Reload the unscanned originals in the document feeder.
6. Resume scanning.
If you experience repeated jams, ensure that the hatch door is fully closed.
ENWW Paper feeding problems 109