Manual

●
Slide the paper guides to t the width of the document. If there is any gap between the paper guides and
the edges of the documents, the scanned image might be skewed.
NOTE: When loading small documents like checks, place the longest edge parallel to the paper width
guides.
Figure 2-2 Adjust paper guides
Method to load documents
Determine the type of documents to load in the ADF input tray, and then use one of the following methods:
●
Load same-sized documents
●
Load documents on the scanner glass
NOTE: To scan fragile documents (such as photos or documents on wrinkled or very light paper), place the
document face down on the scanning glass.
Load same-sized documents
Make sure to refer the section Required guidelines before loading documents, and then follow the following
steps to load same-sized documents in the ADF input tray:
1. Tap the long edge of the pages on a at surface, then rotate and tap the top edge of the document
pages to align the edges of the document pages.
Load originals 15