HP EliteDesk 705 G1 Microtower HP EliteDesk 705 G1 Small Form Factor HP EliteDesk 705 G1 Desktop Mini - Maintenance and Service Guide

WLAN antennas
The antennas route from the WLAN module to the cable connectors on the rear of the computer.
To install the antennas:
1. Prepare the computer for disassembly (
Preparation for disassembly on page 121).
2. Remove the access panel (
Access panel on page 122).
3. Remove the hard drive (
Hard drive on page 123).
4. Remove the drive cage (
Drive cage on page 139).
5. Remove the heat sink (
Heat sink on page 136).
6. Remove the fan (
Fan on page 138).
7. Disconnect the WLAN antenna cables from the WLAN module.
8. Remove the system board (System board on page 148).
152 Chapter 6 Removal and replacement procedures – desktop mini (DM) chassis