HP EliteDesk 705 G1 Microtower HP EliteDesk 705 G1 Small Form Factor HP EliteDesk 705 G1 Desktop Mini - Maintenance and Service Guide

Removing a 3.5-inch device
CAUTION: All removable media should be taken out of a drive before removing the drive from the
computer.
1. Prepare the computer for disassembly (Preparation for disassembly on page 72).
2. Remove the access panel (
Access panel on page 73).
3. Remove the front bezel (
Front bezel on page 73).
4. Rotate the drive cage to its upright position.
5. Disconnect the drive cables from the rear of the drive, or, if you are removing a media card reader,
disconnect the USB cable from the system board as indicated in the following illustration.
88 Chapter 5 Removal and replacement procedures – small form factor (SFF) chassis