Maintenance and Service Guide HP ProDesk 400 G1 Microtower HP ProDesk 480 G1 Microtower HP ProDesk 490 G1 Microtower HP ProDesk 400 G1 Small Form Factor

Front bezel security
The front bezel can be locked in place by installing a security screw provided by HP. To install the
security screw:
1. Prepare the computer for disassembly (
Preparation for disassembly on page 92).
2. Remove the access panel (
Access panel on page 93).
3. Remove one of the five silver 6-32 standard screws located on top of the drive cage.
4. Install the security screw through the middle front bezel release tab to secure the front bezel in
place.
Front bezel security
95