Maintenance and Service Guide HP ProDesk 400 G1 Microtower HP ProDesk 480 G1 Microtower HP ProDesk 490 G1 Microtower HP ProDesk 400 G1 Small Form Factor

Drives
Description Spare part number
Optical drives
DVD±RW drive 657958-001
DVD-ROM drive 608394-001
Blu-ray BD-RW SuperMulti XL Drive 719157-001
Hard drives
2 TB, 7200 rpm hard drive, 3.5 inch 747993-001
1 TB hard drive, hybrid SSD 724937-001
1 TB, 7200 rpm hard drive, 3.5 inch 747992-001
500 GB, 7200 rpm hard drive, 3.5 inch 751283-001
500 GB hard drive, hybrid SSD 724938-001
256 GB Solid State Drive (SSD), self-encrypting (SED) 680020-001
180 GB Solid State Drive (SSD) 754076-001
128 GB Solid State Drive (SSD) 665961-001
120 GB Solid State Drive (SSD) 756459-001
20 GB Solid State Drive (SSD) 683305-001
Card reader
14-in-1, USB 3.0, 3.5-inch, UHS-I 716390-001
15-in-1, USB 3.0, 3.5-inch, UHS-II 736299-001
Adapter, USB 3.0 to 2.0 736835-001
When installing drives, follow these guidelines:
●
The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA
connector on the system board labeled SATA0.
●
Connect a secondary hard drive to the light blue SATA connector on the system board labeled
SATA1.
●
Connect an optical drive to the white SATA connector on the system board labeled SATA5.
●
Connect a media card reader USB 3.0 cable with a USB 3.0 to USB 2.0 adapter to the USB 2.0
connector on the system board labeled MEDIA.
●
The power cable for the drives has two branches coming off the system board connector. The first
branch is a dual-headed cable with the first connector (four-wire) routed to the 3.5-inch optional
drive bay and the second connector (two-wire) routed to the slim optical drive bay. The second
Drives
105