Maintenance and Service Guide HP ProDesk 400 G1 Microtower HP ProDesk 480 G1 Microtower HP ProDesk 490 G1 Microtower HP ProDesk 400 G1 Small Form Factor

4. Disconnect the drive cables from the rear of the drive, or, if you are removing a media card
reader, disconnect the USB cable from the system board as indicated in the following illustration.
5. Remove the two silver 6-32 mounting screws from the side of the device (1) and slide the device
out of the front of the drive bay (2).
66 Chapter 5 Removal and replacement procedures: Microtower