User's Manual

Operating the Monitor
Main Menu Sub menu Description
Setup
• Menu: Exit
• - : Decrease
• +: Increase
• Set: Select another sub-menu
Language
OSD Position
White Balance
Power Indicator
Factory Reset
To choose the language in
which the control names are
displayed.
To adjust position of the OSD
window on the screen.
If the output of the video card
is different than the required
specifications, the color level
may deteriorate due to video
signal distortion. Using this
function, the signal level is
adjusted to fit into the
standard output level of the
video card in order to provide
the optimal image. Activate
this function when white and
black colors are present in the
screen.
Use this function to set the
power indicator on the front
side of the monitor to ON or
OFF.
If you set OFF, it will turn off.
If you set ON at any time, the
power indicator will
automatically be turned on.
Restore all factory default
settings except Language.
Press the > button to reset
immediately.
If this does not improve the screen image, restore the factory default settings. If
necessary, perform the white balance function again. This function will be enabled
only when the input signal is an analog signal.
User Guide 4–11