HP Z240 Tower Workstation QuickSpecs

QuickSpecs
HP Z240 Tower Workstation
Technical Specifications - Graphics
c04760707 — DA – 15358 Worldwide — Version 3 — November 11, 2015
Page 42
Available Graphics
Drivers
Windows 8.1 / 8 (64-bit and 32-bit)
Windows® 7 (64-bit and 32-bit)
Linux®
HP qualified drivers may be preloaded or available from the HP support
Web site:
http://welcome.hp.com/country/us/en/support.html
Note
1. AMD Eyefinity technology supports up to six DisplayPort™
monitors on an enabled graphics card. Supported display quantity,
type and resolution vary by model and board design; confirm
specifications with manufacturer before purchase. To enable
more than two displays, or multiple displays from a single output,
additional hardware such as DisplayPort-ready monitors or
DisplayPort 1.2 MST-enabled hubs may be required. See
www.amd.com/eyefinityfaq for full details.
2. OpenGL 4.4 support available with driver 14.301.xxx or later.
3. OpenCL 2.0 support planned in driver updates for early 2015.
4. For HP Z440 Workstation configurations, the HP Z4 Fan and Front
Card Guide Kit, which is available both CTO (G8T99AV) and AMO
(J9P80AA), is required.
NVIDIA® Quadro® M4000
8GB Graphics
Form Factor
Dimensions: 4.4” H x 9.5” L
Single Slot, Full Height
Cooling: Active
Weight: 475 grams (without extender)
Graphics Controller
NVIDIA Quadro M4000
GPU: GM204 with 1664 CUDA cores
Power: 120 Watts
Bus Type
PCI Express 3.0 x16
Memory
Size: 8GB GDDR5
Memory Bandwidth: 192 GB/s
Memory Width: 256-bit
Connectors
4 DisplayPort 1.2a
Factory configured Option: No video cable adapter included
After market option kit: No video cable adapter included
Additional DisplayPort-to-VGA or DisplayPort-to-DVI adapters are
available as accessories
Maximum Resolution
DisplayPort:
- single DisplayPort up to 4096 x 2160 x 30 bpp @ 60Hz
- supports High Bit Rate 2 (HBR2) and Multi-Stream Transport (MST)
DL-DVI(I) output:
- up to 2560 x 1600 x 32 bpp @ 60Hz
Single Link-DVI(I) output: