HP Z240 Tower Workstation QuickSpecs

QuickSpecs
HP Z240 Tower Workstation
System Technical Specifications
c04760707 — DA – 15358 Worldwide — Version 3 — November 11, 2015
Page 15
Range
Rated Input Current
6A @ 100-240V
Heat Dissipation
Typical: 444 btu/hr (112 kcal/hr)
Maximum: 1484 btu/hr (374 kcal/hr)
Power Supply Fan
80mm x 80mm x 25mm 4-wire PWM
ENERGY STAR® qualified
(Config Dependent)
Yes
CECP Compliant @ 220V
Yes
FEMP Standby Power
Compliant
Yes, with Wake-on-LAN disabled: <2W in S5- Power Off
Built-in Self Test (BIST)
LED
Yes
Surge Tolerant Full
Ranging Power Supply
(withstands power surges
up to 2000V)
Yes
Hood Lock Header
Yes
ErP Lot 6- Tier 1
Compliance @ 230V (<1W
in S5- Power Off)
Yes
ErP Lot 6- Tier 2
Compliance @ 230V
(<0.5W in S5- Power Off)
Yes
Declared Noise Emissions
(Entry-level and High-end
configurations)
Environmental
Requirements
Temperature
Operating: 40° to 95° F (5° to 35° C)
Non-operating: -40° to 140° F (-40° to 60° C)
Humidity
Operating: 8% to 85% RH, non-condensing
Non-operating: 8% to 90% RH, non-condensing
Maximum Altitude
Operating: 3,000 m (10,000 ft)
Non-operating: 9,100 m (30,000 ft)
Dynamic (new)
Shock
Operating: ½-sine: 40g, 2-3ms
Non-operating:
½-sine: 160 cm/s, 2-3ms (~100g)
square: 422 cm/s, 20g
Vibration
Operating random: 0.5g (rms), 5-300 Hz
Non-operating random: 2.0g (rms), 10-500 Hz
NOTES: Values represent individual shock events and do not indicate
repetitive shock events. Values do not indicate continuous vibration.
Cooling
Above 1524 m (5,000 ft) altitude, maximum operating temperature is de-
rated by 1.8° F (1° C) per 305 m (1000 ft) elevation increase
Physical Security and Serviceability
Access Panel
Tool-less
Includes system board and memory information