HP Z240 Tower Workstation QuickSpecs

QuickSpecs
HP Z240 Tower Workstation
Overview
c04760707 — DA – 15358 Worldwide — Version 3 — November 11, 2015
Page 4
Intel® Xeon® E3, Intel® Core™ i3 and Intel® Pentium processors can support either ECC or non-ECC
memory; Intel® Core i5/i7 processors only support non-ECC memory.
Processor numbers differentiate features within each processor family, not across different processor
families. See: http://www.intel.com/products/processor_number/ for details.
Multi-Core is designed to improve performance of certain software products. Not all customers or
software applications will necessarily benefit from use of this technology. Performance and clock
frequency will vary depending on application workload and your hardware and software configurations.
Intel’s numbering is not a measurement of higher performance.
Color
Black
Expansion Slots (see
system board section for
more details)
1 PCIe Gen3 x16 slot
1 PCIe Gen3 x4 slot /x16 connector
1 PCIe Gen3 x4 slot/x4 connector
1 PCIe Gen3 x1 slot
1 PCI slot 32-bit (optional)
1 M.2 slot (PCIe Gen3 x4)*
In the PCIe Gen3 x16 slot, if it is not being used for a graphics card, only cards certified as After Market
Options for this platform are supported.
* M.2 slot supports compatible devices up to 110mm
Expansion Bays (see
storage section for more
details)
 2 external Half Height 5.25" Bays
 1 external 9.5mm Slim Optical Drive Bay
 2 internal 3.5" Drive Bays
 1 internal 2.5" Drive Bay
Front I/O
2 USB 3.0, 1 USB 2.0, 1 USB 2.0 Charging Data Port, 1 Headphone, and 1 Microphone.
Internal I/O
1 USB 3.0 and 3 USB 2.0 ports available as 2 separate 2x10 (3.0 x1, 2.0 x1) and 2x5 (2.0 x2) header:
supports one HP Internal USB 2.0 Port Kit and one USB 3.0 Media Card Reader.
Rear I/O
1 DVI-I Single Link and 2 DisplayPort (DP 1.2) outputs from Intel HD graphics (available on specific
processors only); 4 USB 3.0 ports, 2 USB 2.0 ports, 1 serial port (optional), 1 parallel port (optional), 2
PS/2, RJ-45 (LoM), 1 Audio Line-in, and 1 Audio Line-out, Microphone; 2 IEEE 1394b ports (optional).
Interfaces Supported
SD Media Card Reader (optional)
Chassis Dimensions (H x
W x D)
Standard minitower orientation: 399mm x 170mm x 442mm (15.7 x 6.7 x 17.4 in)
Weight
Exact weights depend upon configuration:
Minimum: 8.6 kg (18.95 lb)
Typical*: 9.4 kg (20.79 lb)
Maximum: 11.9 kg (26.20 lb)
Supported Weight (desktop orientation): 35 kg (77 lb)
* Typical weight when configured with 2 3.5" hard drives, 1 optical drive, 2 DIMMs and 1 NVIDIA Quadro®
K620 graphics card