User guide

Automatic two-sided printing (duplexing) of received faxes
(HP LaserJet 3390/3392 all-in-one only)
When Print duplex is On, all faxes received are printed two-sided. The factory-set default for
printing faxes two-sided is Off.
To change the print duplex setting for faxes
1. On the all-in-one control panel, press Menu.
2.
Use the < or the > button to select Fax setup, and then press
.
3.
Use the < or the > button to select Fax Recv. setup, and then press
.
4.
Use the < or the > button to select Print duplex, and then press
.
5.
Use the < or the > button to select On or Off, and then press
.
Deleting faxes from memory
Use this procedure only if you are concerned that someone else has access to your all-in-one and
might try to reprint faxes from the memory.
CAUTION In addition to clearing the reprint memory, this procedure clears any fax that is
currently being sent, unsent faxes that are pending redial, faxes that are scheduled to be sent
at a future time, and faxes that are not printed or forwarded.
To delete faxes from memory
1. On the all-in-one control panel, press Menu.
2.
Press the > button once to display Fax functions, and then press
.
3.
Use the < or > button to select Clear saved faxes, and then press
.
4.
Press
to confirm the deletion.
90 Chapter 6 Fax ENWW