User Guide

120 Chapter 5 - Removal and replacement EN

The ADF pick roller assembly

The upper pick roller assembly and document feed guide are user

replaceable parts, but the ADF separation pad is not. These

instructions appear in chapter 3 of this manual and are repeated here.

If the ADF has trouble picking paper, the ADF pick roller assembly

may need to be replaced:

1 Unplug the power cord from the

product. If you have a 220V product,

turn off the power switch.

2 Remove the input tray and open the

ADF cover.

3 Press the round green button while

lifting the green lever. Rotate the

green lever until it stops in the open

position. The old pickup roller

assembly should remain on the

black surface.

4 Remove the old assembly and put

the new one in exactly the same

place. The largest roller goes in

back, and the gear side will face

away from you.