User Guide

EN Scanner assemblies 121
5
Lower the green lever with the flat
green part fitting in between the
rollers. Press down on the green
lever until the assembly snaps into
place.
6 To check for proper installation, lift
the green lever until it remains open.
The new pickup roller assembly
should be secured to the lever
assembly and should not fall out.
7 Make sure that both sides of the
assembly are secured by the green
hooks.
8 Lower the green lever assembly and
close the ADF lid. Reinstall the input
tray.
If you are experiencing abnormal jams in the ADF, you may want to
replace the ADF assembly.
7
8
6
5