User Guide

126 Chapter 5 - Removal and replacement EN
Control panel chassis
1 Remove three screws from the control panel chassis (callout 1).
Figure 39. Removing the control panel chassis (1 of 2)
2
Remove the control panel chassis by lifting up on both sides of
the chassis to release tabs on the corners (callout 1), and pull the
chassis away from the scanner body.
Figure 40. Removing the control panel chassis (2 of 2)
Note The speaker and control panel cable are both replaceable parts.
Ensure that the control panel cable and speaker cable are correctly
routed on reinstallation.
2
1
2
1