User Guide

EN Printer assemblies 147

Unplug the fuser cable connector (callout 1) by pressing and

releasing the tab on the back of the connector.

7 Unplug five smaller cable connectors (callout 2) from the ECU

and unwind the cables from the fuser assembly.

8 Unplug the spade connector (callout 3).

9 Remove one screw (callout 4) from the paper-delivery sensor,

and lift out the paper-delivery sensor.

10 Gently lift out the fuser assembly.

Figure 65. Removing the fuser assembly (4 of 4)

To reinstall

Remove the large gear from the end of the fuser assembly, return the

fuser assembly to the chassis, and replace the large gear.