User Guide

EN Printer assemblies 149
Faceup roller
1 Turn the fuser assembly over.
2 Remove the gear (callout 1) from the faceup roller and release
the tab (callout 2) on the face-up roller bushing.
3 Rotate the faceup roller bushing forward until the pin releases.
4 Slide the faceup roller away from the gear side, and lift it out of
the fuser assembly.
Figure 67. Removing the output rollers (2 of 2)
Reinstall note
Flex the faceup roller bushing to pop the pin back into place.
2
22
1