User Guide

164 Chapter 5 - Removal and replacement EN

ECU fuses and ECU pan

1 Remove the right side cover and the back cover (pages 130 and

163).

Note The two fuses on the ECU can now be accessed and replaced, if

necessary, without removing the ECU pan. The fuse closest to the

back of the product is 10A for the 110V model and 20A for the 220V

model. The other fuse is 2.5A, 110V for both models (callout 3 in

Figure 89).

2 Remove the left bottom frame support (page 113).

3 Unplug the three spade connectors (callout 1).

4 Disconnect the motor cable connector (callout 2) on the side of

the motor.

5 Unplug the fuser cable connector (callout 3) by pressing and

releasing the tab on the back of the connector.

6 Unplug all other cable connectors (callout 4) from the ECU.

Figure 85. Removing the ECU pan (1 of 5)