User Guide

168 Chapter 5 - Removal and replacement EN
Paper-feed assembly
1 Separate the scanner from the printer (see pages 113 through
118) and remove the left side door and back cover (pages 129
and 130).
2 Remove the right plate assembly (see page 160).
3 Remove the ECU pan (see page 164).
4 Unwind the fan and solenoid cables from the cable guides
(callout 1) on the paper-feed mechanism.
5 Remove two screws (callout 2) from the paper-feed mechanism.
6 Remove one screw (callout 3) from the paper-sensor PCB
assembly.
Figure 90. Removing the paper-feed assembly (1 of 4)
2
2
2
2
3
1