User Guide

178 Chapter 6 - Troubleshooting EN
Errors
Control panel messages
The majority of the control panel messages are intended to guide the
user through normal operation. The control panel displays the status
of the current operation, including a page count on the second line of
the display if appropriate. When the product is receiving fax data,
print data, or scanning commands, the control panel displays
messages to these affects. In addition, the product displays alert
messages, warning messages, and critical error messages.
Alert and warning messages
Alert and warning messages are displayed temporarily and may
require acknowledgement by pressing
menu/enter to resume or
cancel. With certain warnings, the completion of a job or the quality
of the output may be affected. If the alert or warning message is
related to printing and the auto-continue is on, the product will attempt
to resume the printing job after displaying the warning for 10 seconds
without acknowledgement.
Table 16. Alert and warning messages
Message Possible causes Solutions
Cleaning Mode.
Wait 1-3 Min.
The product is running an internal
cleaning cycle.
Wait for the product to finish the cleaning
cycle. The message will clear when the
cycle is finished.
Fax Busy.
Canceled Send
The fax line to which you were
sending a fax was busy. The
product has cancelled sending
the fax.
Call the recipient to ensure that fax
machine is on and ready.
Check that you are dialing the correct fax
number.
Check that the Redial On Busy option is
enabled.
Unplug the product telephone cord from
the wall, plug in a telephone, and try
making a call.
Plug the product phone cord into a jack
for another phone line.
Try a different phone cord.
If the error persists, check the flat flexible
cable between the LIU and the formatter.
Reseat or replace the cable.
If the error persists, replace the LIU.