User Guide

EN Service mode functions 229
Service mode functions
Secondary service menu
Use the secondary service menu to perform various tests and print
service reports. Below is a hierarchical diagram of the secondary
service menu:
To gain access to the secondary service menu
1 Make sure that the control panel display reads Ready.
2 Press menu/enter.
3 Press 2 on the keypad.
Note You can access the secondary service menu from any other menu
by pressing 2.
4 Use the < and > keys to navigate the secondary service menu.
5 To exit the secondary service menu and remove it from the menu
tree, press cancel to return to the Ready display, then press
cancel again.
To print a list of all the data store parameters
1 From the secondary service menu, use the < and > keys to select
Service reports, and press menu/enter.
2 Use the < and > keys to select Data Store, and press menu/
enter
.
Main menu Submenu Submenu
2ndary Service ............. Service reports............ Continuous Self-Test
Data Store
Extended Keymap
Scanline data ............... Red-corrected
Blue-corrected
Green-corrected
Red-uncorrected
Blue-uncorrected
Green-uncorrected