User Guide

EN Identifying the control panel components 31
Identifying the control panel components
Fax controls
Fax capability is available on the HP LaserJet 3330 product only. Use
the fax controls to send and receive faxes. These controls and the fax
menu or software are used to change commonly used fax settings.
Figure 5. Fax controls
The HP 3330 has extensive faxing capabilities. This manual
describes only sending a fax to one recipient and receiving a fax. For
a full description of the fax capabilities, see “Faxing” in the User
Guide on the product CD.
To send a fax to one recipient
1 Dial the fax number using one of the following methods:
• Use the alphanumeric buttons on the product’s control panel.
• If the fax number you are calling has been assigned to a one-
touch key, press that key.
• If the fax number you are calling has a speed-dial code, press
speed dial, enter the speed-dial code using the alphanumeric
buttons, and press
menu/enter.
Note When dialing with the alphanumeric buttons, include any pauses
or other needed numbers, such as an area code, an access code
for numbers outside a PBX system (usually a 9 or 0), or a long-
distance prefix. For more information, see “Using dialing
characters” in the User Guide on the product CD.