User Guide

EN Media information for the flatbed 51
Perform the following actions to minimize the possibility of jams:
 Remove self-stick notes.
 Remove staples and paper clips.
 Straighten any curls, folds, or wrinkles in documents before
putting them into the document feeder tray.
 Do not insert any document with glue, correction fluid, or wet ink
on it.
 Do not insert gum-backed paper or labels.
 Avoid multiple-copy forms.
 Do not scan originals that are larger or smaller than supported
size limitations. See the User Guide for more information.
Note To obtain good results, it is important that you use the correct
resolution and color settings for your job. See the User Guide
located on the product CD for more information.
Media information for the flatbed
Use the flatbed scanner for copying and scanning if the media is
fragile, thin, thick, or damaged (folded, wrinkled). The flatbed scanner
provides the best copy and scan quality.
The flatbed has no minimum size and a maximum size of legal. In
order to make a copy of a legal-size document, the paper size must
be changed using the
paper size button. Otherwise, the copy will be
cropped to the default paper size.
Loading originals to copy or scan
Use these instructions to load originals into your HP LaserJet
3300mfp series for copying or scanning. For the best-quality scans
and copies, use the flatbed scanner. See "Selecting originals for the
ADF" for guidelines on choosing original documents for scanning and
copying.
If you purchased an HP LaserJet 3300mfp and want to purchase an
ADF, see the User Guide located on the product CD for more
information.
To load originals onto the flatbed scanner
1 Make sure the ADF is free of media.