User Guide

52 Chapter 2 - Operation EN
2 Lift the flatbed scanner cover.
3 Place the original document facedown on the flatbed scanner
with the top left corner of the document located in the lower right
corner of the glass.
4 Gently close the lid.
5 The document is ready to be copied or scanned.
CAUTION To prevent damage to the product, do not allow the scanner lid to
fall onto the flatbed scanner surface. Always close the scanner lid
when the product is not in use.
To load originals into the ADF input tray
ADF capacity is up to 50 sheets of 75 g/m
2
(20-pound) media
(depending on the thickness of the media), or until the ADF input tray
is full.
The minimum size for media in the ADF is 127 x 127 mm (5 x 5
in).
For smaller sizes use the flatbed scanner. The maximum size for
media in the ADF is 215.9 mm wide by 381 mm long (8.5 x 15
in).
1 Make sure the flatbed scanner is free of media.
2 Close the flatbed scanner cover and put the top end of the
original media stack into the ADF input tray, with the media stack
faceup and the first page to be scanned, copied, or faxed on top
of the stack.