User Guide

EN Cleaning the product 59
Cleaning the print path
The HP LaserJet 3300mfp series features a special cleaning mode to
clean the paper path.
Note This process requires a transparency to remove dust and toner
from the print paper path. Do not use bond or rough paper.
Make sure the transparency used in this cleaning process meets
the media requirements for the printer.
If transparency film is unavailable, you can use paper. If you must
use paper, perform the procedure two or three times to ensure
proper cleaning.
1 Load a transparency in the priority input tray.
2 Make sure that the product is in the Ready state.
3 Press menu/enter then scroll to Service and press menu/enter
4
Scroll to Cleaning Mode and press menu/enter.
5 The transparency feeds through the printer slowly. Discard the
transparency.
Note The fax/send and cancel lights blink until the cleaning process is
complete.