User Guide

EN Changing an ADF pick roller assembly 69
Changing an ADF pick roller assembly
If the ADF has trouble picking paper, the ADF pick roller assembly
may need to be replaced:
1 Unplug the power cord from the
product. If you have a 220V product,
turn off the power switch.
2 Remove the input tray and open the
ADF cover.
3 Press the round green button while
lifting the green lever. Rotate the
green lever until it stops in the open
position. The old pickup roller
assembly should remain on the
black surface.
4 Remove the old assembly and put
the new one in exactly the same
place. The largest roller goes in
back, and the gear side will face
away from you.
5 Lower the green lever with the flat
green part fitting in between the
rollers. Press down on the green
lever until it snaps in place.
1
2
3
4
5