User Guide

Loading staples
Load staples if the printer control-panel display prompts you with a STAPLER LOW ON STAPLES
message (the staple cartridge contains fewer than 70 staples) or a STAPLER OUT OF STAPLES
message (the staple cartridge contains 15 or fewer staples). For more information see
Staple level-
detection. When the stapler runs out of staples, jobs can be delivered to the stapler/stacker (if
STAPLES OUT = CONTINUE), but they will not be stapled. For more information see
Stapler/stacker
submenu.
To load staples
1 Turn the stapler unit on the right side of the stapler/stacker toward the front of the printer until the
unit clicks into the open position. Grasp the blue staple-cartridge handle and pull the cartridge
out of the stapler unit.
2 Insert the new staple cartridge into the stapler unit and rotate the stapler unit toward the rear of
the printer until the unit snaps into place.
Figure 4-5 Loading staples in the staple cartridge (stapler/stacker only)
90 4 Maintenance