User Guide

Transfer roller
1 Open the control-panel door and tray 1.
CAUTION Do not touch the black rubber on the roller. Skin oils on the roller can cause
print-quality problems. The use of disposable gloves is recommended when you remove
the transfer roller.
2 Use a transfer-roller removal hook (callout 1) to lift the left end of the metal shaft out of place
near the blue gear (callout 2). If a removal hook is not available use a flat-blade screwdriver.
Slide the transfer roller to the left to remove it.
CAUTION Be careful to release and lift the left side of the roller first, and then slide the
roller out.
Figure 6-5 Transfer roller
Reinstallation tip When you install the transfer roller, make sure that the black collar on
the left side is oriented correctly, with the open end face-down (the solid end is face-up).
User-replaceable parts 177