User Guide

Top cover
NOTE If the optional stapler/stacker or stacker accessory is installed, lift it straight up and off
of the printer to remove it. Then proceed to step 2.
1 Remove the following:
● Top accessory cover. See
Accessory covers and the tray 2 extension door.
● Formatter cover. See
Formatter cover
2 Open the rear output bin, the print-cartridge door, and the front cover.
3 Use needle-nose pliers to release the print-cartridge drive-arm tab (callout 1).
Hint Push the print-cartridge drive-arm (callout 2) back into the printer to avoid
damaging it when you remove the top cover.
Figure 6-20 Top cover (1 of 3)
192 6 Removing and replacing parts