User Guide

Control-panel assembly
CAUTION The product contains components that are sensitive to electrostatic discharge
(ESD). Always perform service work at an ESD-protected workstation.
CAUTION Always remove the top cover before removing the control panel. If you drop any
of the control-panel mounting screws into the printer when you remove the control panel, they
might be difficult to recover. Severe damage to the printer can result if the power is turned on
when loose screws are inside the printer.
1 Remove the following assemblies:
● Rear accessory cover. See
Accessory covers and the tray 2 extension door.
● Top cover. See
Top cover.
2 Place the top cover upside-down on a padded work surface.
Control-panel display 205