User Guide

Power supply
1 Remove the following assemblies:
● Rear output bin. See
Rear output bin.
● Rear accessory cover and tray 2 extension door. See
Accessory covers and the tray 2
extension door.
● Top, right-side, and left-side covers. See
Top cover through Left-side cover.
● Fuser. See
Fuser.
● Formatter assembly. See
Formatter assembly .
2 Remove two screws (callout 1) and then slide the PCA guide (callout 2) toward the rear of the
printer to remove it.
3 Remove the three machine screws (callout 3) and one grounding screw (callout 4).
Figure 6-59 Power-supply assembly (1 of 7)
WARNING! When reinstalling the power supply, you must use a grounding screw to
secure the ac outlet to the printer chassis.
236 6 Removing and replacing parts