User Guide

Main motor
1 Remove the following assemblies:
● Rear accessory cover. See
Accessory covers and the tray 2 extension door.
● Top cover. See
Top cover.
● Right-side cover. See
Right-side cover.
● Formatter cover. See
Formatter cover
2 Unplug two flat cables (callout 1) and the main motor-harness connector from the
dc controller PCA (locations J80, J81, and J98).
3 Remove the cables from the cable guide (callout 2).
Figure 6-76 Main motor (1 of 2)
Motors and fans 255