User Guide

Paper-feed assembly
1 Remove the following assemblies:
● Tray 1. See
Tray 1.
● Tray 1 pickup assembly. See
Tray 1 paper-pickup assembly .
2 Unplug the paper-feed assembly wire-harness connector from the dc controller PCA
(location J89), and then unweave the wire-harness from the cable guide.
Hint You might have to remove additional wire-harnesses from the wire guides to gain
access to the paper-feed assembly wire-harness.
3 Feed the paper-feed assembly wire-harness through the hole in the chassis (callout 1).
4 Remove three screws (callout 2).
2
1
Figure 6-83 Paper-feed assembly
5 Lift the paper-feed assembly out of the printer.
Pickup and feed assemblies 261