User Guide

Tray 2/500-sheet feeder media-size sensor (PS101)
Tray 2 and the 500-sheet feeder each contain a media-size sensor.
Tray 2 media-size sensor (PS101)
1 Remove the following assemblies:
● Top cover. See
Top cover.
● Right-side cover. See
Right-side cover.
● Formatter assembly. See
Formatter assembly .
2 Unplug the sensor cable (callout 1).
3 Remove two screws (callout 2).
4 Press the locking tab (callout 3), and then slide the sensor toward the front of the printer to
release it.
3
2
1
Figure 6-91 Tray 2 media-size sensor
5 Lift the sensor away from the printer.
Sensors and switches 269