User Guide

1,500-sheet feeder media-size sensor

1 Remove the following assemblies:

● Door. See

1,500-sheet feeder door.

● Rear and right-side covers. See

1,500-sheet feeder rear cover and 1,500-sheet feeder right-

side cover.

2 Unplug the sensor wire-harness at the sensor (callout 1).

3 Remove one screw (callout 2).

4 Remove the sensor.

CAUTION Two plastic locator pins are on the back of the sensor. Be careful not to break

them when you remove the sensor.

Figure 6-127 1,500-sheet feeder media-size sensor

Reinstallation tip When you reinstall the sensor, verify that the sensor body is flush

with the chassis.

296 6 Removing and replacing parts