User Guide

Resets submenu
To find the RESETS submenu, use the control panel to open the CONFIGURE DEVICE menu (see
Using the control panel. Items on the Resets submenu are used to return settings to the defaults and
to change settings such as PowerSave/Sleep.
The following section lists the settings and their possible values in the RESETS submenu. The
default value for each setting is the one that has an asterisk (*) next to it.
Table 7-3 Resets submenu
Item Values Explanation
RESTORE FACTORY SETTINGS No values available Performs a simple reset and restores
most of the factory (default) settings.
This item also clears the input buffer
for the active I/O. Restoring factory
settings does not affect the network
parameter settings on the optional
HP Jetdirect print server.
CAUTION Restoring memory
during a print job cancels the
print job.
POWERSAVE
(HP LaserJet 4200/4200L/4300 only)
SLEEP (HP LaserJet 4250/4350 only)
OFF* ON Turns the PowerSave/Sleep mode on
or off. The PowerSave/Sleep mode
affects the printer in two ways:
■ Minimizes the amount of power
that the printer consumes when it
is idle.
■ Reduces wear on the electronic
components in the printer (for
example, it turns off the display
backlight, although the display can
still be read).
The printer automatically leaves the
PowerSave/Sleep mode when you
send a print job, press a printer control
panel button, open a tray, or open the
top cover.
You can set the amount of time that the
printer remains idle before it enters the
PowerSave/Sleep mode. For more
information see
System Setup submenu.
320 7 Troubleshooting