User Guide

Control panel message Description Recommended action
21 PAGE TOO COMPLEX
For help press
alternates with
21 PAGE TOO COMPLEX
To continue press
The printer cannot process the page quickly
enough.
1
Press
( S ELECT button) to process
the page.
NOTE A loss of data will
occur.
2 Make the page contents less complex
and re-send the print job.
22 EIO X
BUFFER OVERFLOW
To continue press
The printer's EIO card in slot X has
overflowed its I/O buffer during a busy state.
1
Press
( S ELECT button) to resume
printing.
NOTE A loss of data will
occur.
2 Check the configuration of the EIO card
and the host computer.
3 If this error message persists, replace
the EIO card.
22 PARALLEL I/O
BUFFER OVERFLOW
For help press
alternates with
22 PARALLEL I/O
BUFFER OVERFLOW
To continue press
The parallel buffer has overflowed during a
busy state.
1
Press
( S ELECT button) to resume
printing.
NOTE A loss of data will
occur.
2 Check the parallel I/O configuration.
Set HIGH SPEED to NO and
ADVANCED FUNCTIONS to OFF.
3 Replace the formatter PCA. See
Formatter assembly .
40 EIO X BAD
TRANSMISSION
To continue press
A connection with the card in EIO slot X
has been broken abnormally.
1
Press
( S ELECT button) to resume
printing.
NOTE A loss of data will
occur.
2 Check that all of the cables are
connected to the EIO ports and that the
EIO board is seated properly.
3 If possible, print to another network
printer to verify that the network is
working properly.
4 Check the configuration of the EIO card.
5 If this error message persists, replace
the EIO card.
Table 7-7 Numerical printer messages (continued)
354 7 Troubleshooting