User Guide

Item Values Explanation
Y DIMENSION UNIT OF MEASURE: Use this option
to select the unit of measure to use
when you set custom paper sizes for
the specified tray.
X DIMENSION: Use this item to set the
measurement of the width of the paper
(measurement from side to side in the
tray). The options are 3.0 to 8.50
INCHES or 76 to 216 MM.
Y DIMENSION: Sets the measurement
of the length of the paper
(measurement from front to back in the
tray). The options are 5.0 to 14.00
INCHES or 127 to 356 MM.
After the Y DIMENSION value is
selected, a summary screen appears.
This screen contains feedback that
summarizes all the information that
was specified on the previous three
screens, such as TRAY 1 SIZE= 8.50 x
14 INCHES, Setting saved.
Control-panel menus 67