User Guide

Configure-device menu
This menu contains administrative functions.
Printing submenu
Print-quality submenu
System Setup submenu
Stapler/stacker submenu
I/O submenu
Resets submenu (HP LaserJet 4250/4350 only)
Printing submenu
Some items on this menu are available in the program or printer driver (if the appropriate driver is
installed). Program and printer-driver settings override control-panel settings. In general, it is better to
change these settings in the printer driver, if applicable.
The section that follows lists the settings and possible values. In the Values column, the default value
for each setting is the one that has an asterisk (*) next to it.
Item Values Explanation
COPIES
*1 to 32000 Use this item to set the default number of copies by
selecting any number from 1 to 32000. Use
(U P A RROW
button) or
(D OWN A RROW button) to select the number of
copies, or use the numeric keypad, if available, to specify
the number of copies.
Use
(S ELECT button) after specifying the number of
copies. The Setting saved message appears.
This setting applies only to print jobs that do not have the
number of copies specified in the program or printer driver,
such as an MS-DOS, UNIX, or Linux program.
NOTE It is best to set the number of copies in the
program or printer driver. (Program and printer-
driver settings override control-panel settings.)
DEFAULT
PAPER SIZE
*LETTER
LEGAL
EXECUTIVE
STATEMENT
8.5 x 13
A4
A5
B5 (JIS)
Use this item to set the default image size for paper and
envelopes. (The item name changes from paper to envelope
as you scroll through the available sizes.) This setting
applies only to print jobs that do not have the paper size
specified in the program or printer driver.
68 3 Operation