User Guide

Item Values Explanation
CARTRIDGE
LOW
STOP
*CONTINUE
Use this item to specify how the printer behaves if the print
cartridge is low. For the HP LaserJet 4250 Series printer, the
message first appears when about 15% (10,000-page
cartridge) or about 8% (20,000-page cartridge) of the life
remains in the print cartridge. For the HP LaserJet 4350
Series printer, the message first appears when about 25%
(10,000-page cartridge) or about 15% (20,000-page
cartridge) of the life remains in the print cartridge. Print
quality is not guaranteed if you print after receiving this
message.
STOP: The printer pauses printing until you replace the print
cartridge or press
(S ELECT button) each time you turn the
printer on. The message appears until you replace the print
cartridge.
CONTINUE: The printer continues to print, and the message
appears until you replace the print cartridge.
CARTRIDGE
OUT
STOP
*CONTINUE
Use this item to specify how the printer reacts if the print
cartridge is empty.
STOP: The printer stops printing until you replace the print
cartridge.
CONTINUE: The printer continues to print, and the
REPLACE CARTRIDGE message appears until you replace
the print cartridge. HP does not guarantee print quality if you
select CONTINUE after a REPLACE CARTRIDGE
condition. Replace the print cartridge as soon as possible to
ensure good print quality.
If the end of drum life is reached, the printer stops,
regardless of the CARTRIDGE OUT setting.
JAM RECOVERY
*AUTO
OFF
ON
Use this item to specify how the printer behaves if a jam
occurs.
AUTO: The printer automatically selects the best mode for
printer jam recovery (usually ON).
OFF: The printer does not reprint pages following a jam.
Printing performance might be increased with this setting.
ON: The printer automatically reprints pages after a jam is
cleared.
RAM DISK
*AUTO
OFF
Use this item to specify how the RAM disk is configured.
This item appears only if no optional hard-disk accessory is
installed.
AUTO: The printer determines the optimal RAM-disk size
based on the amount of available memory.
OFF: The RAM disk is not available.
NOTE If you change the setting from OFF to
AUTO, the printer automatically reinitializes when it
becomes idle.
LANGUAGE
*ENGLISH
Several
Selects the language for the messages that appear on the
printer control-panel display.
76 3 Operation