User Guide

Stapler/stacker submenu
Use this submenu to select settings for the optional stapler/stacker, if it is installed.
Some items on this menu are available in the program or printer driver (if the appropriate driver is
installed).
The section that follows lists the settings and possible values. In the Values column, the default value
for each setting is the one that has an asterisk (*) next to it.
Item Values Explanation
STAPLES *NONE
ONE
Use this item to specify whether print jobs are stapled or not.
NONE: Turns off stapling
ONE: Turns on stapling
NOTE Selecting the stapler at the printer control
panel changes the default setting to staple. It is
possible that all print jobs will be stapled.
STAPLES OUT
*STOP
CONTINUE
Use this item to specify how the printer behaves if the
stapler runs out of staples, as indicated by the REPLACE
STAPLE CARTRIDGE message on the printer control-panel
display.
STOP: The printer stops printing until you refill the stapler.
CONTINUE: The stapler accepts print jobs if it is out of
staples, but the pages are not stapled.
For information about ordering a new staple cartridge, see
Ordering parts and supplies. For information about refilling
the stapler, see
Loading staples.
I/O submenu
Items on the I/O (input/output) menu affect the communication between the printer and the computer.
The contents of the I/O submenu depend on which EIO card is installed.
The section that follows lists the settings and possible values. In the Values column, the default value
for each setting is the one that has an asterisk (*) next to it.
Item Values Explanation
I/O TIMEOUT
5 to 300 (*15) SECONDS Use this item to select the I/O timeout period in seconds.
Use this setting to adjust timeout for the best performance. If
data from other ports appear in the middle of your print job,
increase the timeout value.
PARALLEL
INPUT
HIGH SPEED
ADVANCED FUNCTIONS
Use this item to configure the parallel features.
HIGH SPEED: Select YES to enable the printer to accept
the faster parallel communications that are used for
connections with newer computers.
Control-panel menus 77