User Guide

Item Values Explanation
ADVANCED FUNCTIONS: Turn the bidirectional parallel
communication on or off. The default is set for a bidirectional
parallel port (IEEE-1284).
The function allows the printer to send status readback
messages to the computer. (Turning the parallel advanced
functions on might slow language switching.)
EMBEDDED JETDIRECT
MENU (HP LaserJet
4250/4350 only)
TCP/IP
IPX/SPX
APPLETALK
DLC/LLC
SECURE WEB
(HP LaserJet 4250 and 4350
only)
DIAGNOSTICS
(HP LaserJet 4250 and 4350
only)
Use this item to select features in the embedded Jetdirect.
TCP/IP: Select whether the TCP/IP protocol stack is enabled
or disabled. You can set several TCP/IP parameters.
Select the TCP/IP CONFIGURE METHOD to configure the
EIO card. For the MANUAL option, set the values for IP
ADDRESS , SUBNET MASK , LOCAL GATEWAY, and
DEFAULT GATEWAY.
IPX/SPX: Select whether the IPX/SPX protocol stack (in
Novell NetWare networks, for example) is enabled or
disabled.
APPLETALK: Enable or disable an AppleTalk network.
DLC/LLC: Select whether the DLC/LLC protocol stack is
enabled or disabled.
SECURE WEB: Specify whether the embedded Web server
accepts communications by using only secure HTTP
(HTTPS) or by using both HTTP and HTTPS.
DIAGNOSTICS: Provides tests to help diagnose network
hardware or TCP/IP network connection problems.
Resets submenu (HP LaserJet 4250/4350 only)
Items on the Resets submenu relate to returning settings to the defaults and changing settings such
as Sleep Mode.
The section that follows lists the settings and possible values. In the Values column, the default value
for each setting is the one that has an asterisk (*) next to it.
Item Values Explanation
RESTORE
FACTORY
SETTINGS
There is no value to select. Use this item to perform a simple reset and restore most of
the factory (default) settings. This item also clears the input
buffer for the active I/O.
CAUTION Restoring memory during a print job
cancels the print job.
CLEAR
MAINTENANCE
MESSAGE
There is no value to select. This item appears after the PERFORM PRINTER
MAINTENANCE message. The PERFORM PRINTER
MAINTENANCE message can be temporarily cleared for
approximately 10,000 pages, and then the message
appears again. When the PERFORM PRINTER
MAINTENANCE message first appears, a new maintenance
78 3 Operation