Owner manual

Choosing a Printer Connection
The following descriptions will help you choose the correct connection
to use between the computer and printer.
Note No printer cables are included in the package contents. See ordering
information starting on page 2-20 for HP recommended printer cables.
Large Parallel Port (B on preceding page)
Use this port when:
• Connecting to an IBM, or IBM-compatible, computer.
• Your parallel cable has a standard length (up to three meters) with a
B-type (large) end.
See page 1-10 for installation instructions.
Small Parallel Port (C on preceding page)
Use this port when:
• Connecting to an IBM, or IBM-compatible, computer.
• Your parallel cable is longer than three meters (up to ten meters) with
a C-type (small) end.
See page 1-10 for installation instructions.
LocalTalk Port (A on preceding page)
Use this port when:
• Connecting to a Macintosh, or Macintosh-compatible, computer. See
page 1-11 for installation instructions.
• Connecting to a LocalTalk network. See Appendix C for installation
instructions.
Infrared Port
Use this port when:
• Printing from an IrDA-compliant device, such as a laptop or
notebook computer. For more information on infrared printing, see
page 3-16.
1
Printer Setup
EN Printer Setup 1-9