Owner manual

Installing the Windows Printing Software
The installation program for the Windows Printing System will install all
of the components needed for printing in a Windows environment. See
page 2-15 for descriptions of the Windows Printing System components.
Locate either the CD ROM or the diskette and insert into the appropriate
drive:
For Windows 3.1 and Windows 3.11 for Workgroups
CD ROM Installation Instructions
1 Close all running applications.
2 In the Windows Program Manager screen, click the File menu.
3 Click Run.
4 Type D:\DISK1\SETUP (or the appropriate drive directory letter) in
the command line box and click OK.
5 Follow the instructions on the screen.
The printer setup is complete!
Diskette Installation Instructions
1 Close all running applications.
2 In the Main Menu, click Control Panel.
3 Click Printer icon.
4 Click Add Printer.
5 Click Install Unlisted.
6 Click Install.
7 Type A:\SETUP (or the appropriate drive directory letter) in the
command line box and click OK.
8 Follow the instructions on the screen.
Note For additional Windows software not available on the diskette(s) see
page 1-16.
The printer setup is complete!
1-14 Printer Setup EN