Owner manual

Front Status Panel Light Messages
The following front panel status messages indicate various conditions of
the paper trays and the IR port.
Tray 1 empty
If the Tray 1 status light is on, a job has been sent to Tray 1, and the
tray is out of media.
Add desired media into Tray 1 (see page 3-5). The printer will
automatically begin printing.
Manual Feed with Pause request
If the Tray 1 status light blinks, a print job has been sent to the printer
with a “Manual Feed with Pause” request. (See page 3-9.)
Put desired media into Tray 1 (see page 3-5), and press [Go] to begin
printing.
Tray 2 empty
If the Tray 2 empty light is on, there is no paper in Tray 2.
Load paper into Tray 2 (see page 1-7).
Infrared connection is established
If the IR status light is on, a job is being sent from an IrDA-compliant
device, such as a laptop or notebook computer, to the printer.
No action is needed.
2
Printer Basics
EN Printer Basics 2-7