Owner manual
Printing on Transparencies
Transparency Guidelines
Only use transparencies recommended for use in laser printers, such as
HP transparency film. (See page 2-21 for ordering information.) See
Appendix B for media specifications.
• Print transparencies from Tray 1.
• Use the top output tray to reduce curling (this is for transparencies only,
for other media use back output tray to reduce curling).
• To avoid transparencies from sticking together, remove any
transparencies in the output tray before printing another transparency.
• Place transparencies on a flat surface after removing from the printer.
Printing on Transparencies
Figure 3-9
3-14 Printing Tasks EN