- HP Copier User Manual

1 The basics

Loading input trays

1 Open Tray 1.

2 Load A4- or Letter-size paper with the long edge leading into the

product. See “Paper specifications” on page 83 for more

information on loading custom sizes.

CAUTION

To avoid jams, print sheets of labels one at a time.

3 Adjust the paper guides so they lightly touch the paper stack,

but do not bend the paper.

4 Make sure the paper fits under the tabs on the guides and not

above the load level indicators.

Note

If printing on A3- or Ledger-size paper, also pull out the tray

extension until it stops.

Note

By default, Tray 1 Size is set to Any. If you do not specify a size, any

job sent to the product prints from Tray 1, if print media is loaded in

the tray.

ENWW